Create 3dcarving using image reference
1. Prepare the reference, you can download this reference by click on the image > Right click > save as
2. Go to Menu bar > Customize > Units Setup > set display units in to = "Centimeters" and also System Units = "Centimeters" *Note : it's just an example, you might choose your own units
3. Go to Create panel > Standard Primitive > Plane > set the Length = 40 cm and the Width = 80
4. Apply bitmap material to the object by press "M" on your keyboard > Standard material > Difuse > bitmap > browse the image reference
5. Select Object > Right Click > Object Properties > un check "Show frozen in Gray"
6. Select Object > Right Click > Freeze Selection > Now you can freely create an object over the image reference.
7. Create basic model, Go to Create panel > Standard Primitive > Plane > See the picture below
8. Select Object > move forward to avoid collision with the reference image
9. Select Object > Right Click > Convert To Editable Poly
10. Select Object > Right Click > Object Properties
11. Set the visibility object = 0.3, to make the object transparent, so it's will be easy to work with.
12. Select Object > Go to Modify Panel > Editable Poly > Edge Selection > Extrude Edge ( Click some edges + press "Shift" on your Keyboard + drag/Move ) and make as the sample below
13. Continue Step 12 above, follow these pictures.
14. to be continue
ijin ikut nyomot tutorialnya om . . . matur suwun,
ReplyDeletetambah barokah ilmunya om . . . hehehe
wah bener2 telaten mas nya ini. hasilnya keren
ReplyDeleteLaser engraving can improve the efficiency of engraving, make the surface smooth and smooth, rapidly reduce the temperature of the carved non-metal materials, and reduce the deformation and internal stress of the carved objects. It can be widely used in the field of a fine carving of various non-materials.
ReplyDeleteCNC Cutting Cutter Machine Engraving Machine for Carved Wooden Furniture
https://amzn.to/3hlQRih